Nov 9, 2018

Tool Clamp Storage

0 comments

Tool & Clamps storage rack made with reclaimed pine plywood, used for packaging and shipment. 19mm ply @ ₹700 for a 3'x6'

 

New Posts
  • Finally was able to build this folding table base out. Looking forward to building more stuff now that i have a workbench ! I have a scrap 3/4" ply - 3ft x 2 1/2ft approx. Planning to use that for the top Pine used is 3" x 1.5" . Pine stock cost around 900/cft Got it from Krishna saw mill @ timber market Top Boards (0.75" Plywood) 1. 33.5" x 37.5" Cut Pieces 1. A - 3.5" x 1.5" - 24" (4) 2. B - 3.5" x 1.5" - 27.75" (4) 3. C - 3.5" x 1.5" - 21" (4) 4. D - 3.5" x 1.5" - 24.5" (2) 5. E - 1" x 0.75" (3/4" Ply) - 27.75" (4) 6. F - 3" x 0.75" (3/4" Ply) - 13.25" (4) 7. G - 21" x 0.75" (3/4" Ply) - 13.25" (2)
  • Old dull chisel now back in action. Need to finish it off on sandpaper 400, 600 and 1200 grid. Takes 15 to 20 min to sharpen a blade. The honing guide on Aliexpress was on my list too to buy but before I spent that money I thought let me give this a try. I am very happy with the result. 😎 This is my hack to the one shown on a youtube video. I used a pvc pipe instead of a dowel.
  • Material 12 mm plywood
  • Twitter Clean
  • w-facebook
  • w-googleplus
  • w-youtube
This site was designed with the
.com
website builder. Create your website today.
Start Now